domingo, 4 de noviembre de 2012

DIY: 10 minutes Chain Bracelet!


Sunday it's the best day for a DIY proyect, and today I'm sharing with you a super easy and gorgeous bracelet that seriously you can do it like in ten minutes or less... So let's get started!

0- Before start make sure that you have all the materials, you need: Gold chain (I use about 2'4"), silk ribbon (the same length that the chain), scissors, pliers, and  a ligther.
1- Cut the chain using pliers (it's super easy but in the store someone could do it for you), then take the ribbon and slide through the holes in the chain.
2- Once the ribbon it's inside the chain, pull down the ribbon, until the links of the chain come together.
3- Cut off the excess of ribbon.
4- Tie the ribbon in a bow, and pass the ligther quickly in the ends of the ribbon to prevent split ends, and that's all hope you liked! ;)

Para mi el domingo es el mejor día para un proyecto de "hazlo tu misma" y hoy les traigo una proyecto super fácil para que hagan una pulsera muy linda en 10 minutos o menos... Así que manos a la obra!

0- Antes de empezar asegúrate de tener todos los materiales, necesitas cadena (yo use unos 80 cm), cinta (mas o menos la misma longitud que la cadena), tijeras, una pinza y un encendedor.
1- Corta la cadena usando las pinzas (en la tienda pueden hacerlo por ti) una vez tengas el tamaño listo, pasa la cinta a través de la cadena.
2- Jala la cinta hacia abajo hasta que los eslabones de la cadena estén juntos.
3- Corta el exceso de cinta.
4- Para terminar haz un lazo y para que la cinta no se suelte en las puntas, pasa rápidamente (solo por un segundo) el encendedor por la puntas y listo!... Espero que les guste ;)

Have a nice day! ㋡
 

1 comentario:

Thanks for all yout loving coments, I love to know what you thinking ;)

Related Posts Plugin for WordPress, Blogger...